Sorry, this product is no longer offered for sale. The recommended replacement product is psr4a-four-channel-power-supply-and-readout.
Four Channel Flow Controller Power Supply and Readout
Model: 247d-four-channel-power-supply
Four Channel Flow Controller Power Supply and Readout
Model: 247d-four-channel-power-supply
Overview
Overview
Technical Specs
- Display3 1/2 digit 0.56" red LED, display is 1 of 4 sequentially selectable
- Channels4
- Input Signal4 x 0-5 VDC
- Gas Correction Factor0.1 - 4.0 (rear panel)
- External Set Point0-5 VDC
- External ON/OFFTTL-compatible
- Analog Signal OutputMinimum load impedance: 10 k Ohm/channel
- Unscaled Signal Output4 x 0-5 VDC = 0-100% of full scale
- Scaled Signal Output0-2 VDC (max.)
- Trip Pointsn/a
- Power Supply Output±15 VDC at 1.0 Amp, max.
- Power Requirements117/234 VAC ±15%, 50-60 Hz
- For Use WithMass Flow Controllers 179, 180, 579, 1179, 1479, 1480, 1559, 1579, 2179, M10M, M100
- Operating Temperature15°C to 40°C
Technical Specs
- Display3 1/2 digit 0.56" red LED, display is 1 of 4 sequentially selectable
- Channels4
- Input Signal4 x 0-5 VDC
- Gas Correction Factor0.1 - 4.0 (rear panel)
- External Set Point0-5 VDC
- External ON/OFFTTL-compatible
- Analog Signal OutputMinimum load impedance: 10 k Ohm/channel
- Unscaled Signal Output4 x 0-5 VDC = 0-100% of full scale
- Scaled Signal Output0-2 VDC (max.)
- Trip Pointsn/a
- Power Supply Output±15 VDC at 1.0 Amp, max.
- Power Requirements117/234 VAC ±15%, 50-60 Hz
- For Use WithMass Flow Controllers 179, 180, 579, 1179, 1479, 1480, 1559, 1579, 2179, M10M, M100
- Operating Temperature15°C to 40°C
Resources & Downloads
Manuals
247D Power Supply/Readout Manual(371.1 kB, PDF) 247D Four Channel Power Supply/Readout Pin-outs(22.5 kB, PDF)
Drawings & CADs
247D Power Supply/Readout Model File(520.1 kB, STP)
Literature
Power Supply/Readouts for MKS MFCs (Archive)(122.1 kB, PDF)