Vacuum/pressure Transducer

Differential

0.2, 1, 2, 5, 10, 20, 50, 100, 200, and 1000 Torr and equivalents in kPa, mbar, inches H2O, and cm H2O

0-1VDC, 0 - 5VDC, 0-10VDC > 10 k Ω load; or 2-wire 4-20 mA from +24VDC supply into < 500 Ω load

Standard: 0.25 in. OD (6.4 mm) tubes
Optional: Various

9-pin D-subminiature standard, terminal block and flying leads optional

0.01% of Full Scale

0.50% of Full Scale unidirectional or bidirectional standard; 0.30% of Full Scale unidirectional or bidirectional, and 0.30% of Reading (unidirectional calibrations only)

0.1% Full Scale/°C for standard accuracy specification

0.04% of Reading/°C

Measurement Side (Px): 1.4 cm
Reference Side (Pr): 9.0 cm
(when equipped with standard 1/4-inch (6.4 mm) O.D. inlet and reference tubes)

0-50°C

Measurement Side (Px): 120% of Full Scale or 20 psi (140 kPa), whichever is higher
Reference Side (Pr): 120% of Full Scale

40 psig (275 kPa)

Measurement Side (Px): Inconel
Reference Side (Pr): Inconel, ceramic, palladium, stainless steel, glass

±15 VDC (±5%) or +13 VDC to +30 VDC @ 25 mA, ripple less than 20 mV

CE, SEMI S2