385 Convectron® ATM Vacuum Transducers
Model: 385-convectron-atm-module
385 Convectron® ATM Vacuum Transducers
Model: 385-convectron-atm-module
Technical Specs
Sensor Type
Convectron® ATM Gauge
Installation Orientation
Horizontal preferred
Measurement Range
1x10-4 to 1000 Torr (N2)
Set Point Range
Absolute: 1x10-4 to 1000 Torr
Differential: 750 Torr below atmosphere to 125 Torr above atmosphere
Filament
Gold-plated tungsten
Connector
Male, 15-pin, high-density D-sub
Operating Temperature
0° to 40°C (32° to 104°F)
Storage Temperature
-40°C to 85°C (-40° to 185°F)
Relays
Four single-pole, single-throw, (SPST) normally open
Relay Contact Rating
1A at 30 VDC resistive, or AC non-inductive
Power Requirements
11 to 26 VDC, 3.6 Watts maximum
Exposed Materials
304 stainless steel, borosilicate glass, Kovar, alumina, NiFe alloy, polyimide, pyrex, ceramic, silicon, epoxy, RTV, Viton, and nickel
Case Material
Aluminum extrusion with powder coat
Internal Volume
35 cc
Weight
340 gm (12 oz) with 1/8 NPT Fitting
Units
Torr
Display
3-digit green LED, automatic ranging (optional)
Compliance
CE
Technical Specs
Sensor Type
Convectron® ATM Gauge
Installation Orientation
Horizontal preferred
Measurement Range
1x10-4 to 1000 Torr (N2)
Set Point Range
Absolute: 1x10-4 to 1000 Torr
Differential: 750 Torr below atmosphere to 125 Torr above atmosphere
Filament
Gold-plated tungsten
Connector
Male, 15-pin, high-density D-sub
Operating Temperature
0° to 40°C (32° to 104°F)
Storage Temperature
-40°C to 85°C (-40° to 185°F)
Relays
Four single-pole, single-throw, (SPST) normally open
Relay Contact Rating
1A at 30 VDC resistive, or AC non-inductive
Power Requirements
11 to 26 VDC, 3.6 Watts maximum
Exposed Materials
304 stainless steel, borosilicate glass, Kovar, alumina, NiFe alloy, polyimide, pyrex, ceramic, silicon, epoxy, RTV, Viton, and nickel
Case Material
Aluminum extrusion with powder coat
Internal Volume
35 cc
Weight
340 gm (12 oz) with 1/8 NPT Fitting
Units
Torr
Display
3-digit green LED, automatic ranging (optional)
Compliance
CE
