Sorry, this product is no longer offered for sale. The recommended replacement product is 670c-signal-conditioner-power-supply.
670B Power Supply and Display with Signal Conditioner
Model: 670b-signal-conditioner-power-supply
670B Power Supply and Display with Signal Conditioner
Model: 670b-signal-conditioner-power-supply
Overview
Overview
Technical Specs
- Display3½, 4½, or 5½ digits, 2-line LCD
- Display UnitsTorr, mTorr, mmHg, mbar, Pa, kPa, inHg, inH20, cmH20, psi, % of Full Scale, ppm of Full Scale (all user-selectable)
- Number of Channels1
- Power Requirements90-132 or 180-264 VAC, 50-60 Hz, 75 VA (max.)
- Input Signal0 to 10 VDC
- Output Signal0 to ±10 VDC on each range into >10K Ω load
- Communication ProtocolRS-232
- ConnectorsI/O: 37-pin female Type “D”, Remote signal: 9-pin male Type “D”
- Trip PointsTwo user configurable trip points with two LEDs on front panel indicate status of each relay
- Trip Point Relay Ratings24 VAC/DC @ 1 Amp resistive
- For Use WithMKS Type 590, 615, 616, 690, 698 sensors
- Rangesx1, x0.1, x0.01 of sensor Full Scale, manual or auto-ranging
- Data Averaging0.1 to 10 sec (user-selectable)
- Response Time1, 40, or 400 msec (user-selectable)
- Operating Temperature15° to 40° C
- Dimensions88 mm x 240 mm x 234 mm
- ComplianceEMC Directive 2004/108/EC
Low Voltage Directive 72/23/EEC
Technical Specs
- Display3½, 4½, or 5½ digits, 2-line LCD
- Display UnitsTorr, mTorr, mmHg, mbar, Pa, kPa, inHg, inH20, cmH20, psi, % of Full Scale, ppm of Full Scale (all user-selectable)
- Number of Channels1
- Power Requirements90-132 or 180-264 VAC, 50-60 Hz, 75 VA (max.)
- Input Signal0 to 10 VDC
- Output Signal0 to ±10 VDC on each range into >10K Ω load
- Communication ProtocolRS-232
- ConnectorsI/O: 37-pin female Type “D”, Remote signal: 9-pin male Type “D”
- Trip PointsTwo user configurable trip points with two LEDs on front panel indicate status of each relay
- Trip Point Relay Ratings24 VAC/DC @ 1 Amp resistive
- For Use WithMKS Type 590, 615, 616, 690, 698 sensors
- Rangesx1, x0.1, x0.01 of sensor Full Scale, manual or auto-ranging
- Data Averaging0.1 to 10 sec (user-selectable)
- Response Time1, 40, or 400 msec (user-selectable)
- Operating Temperature15° to 40° C
- Dimensions88 mm x 240 mm x 234 mm
- ComplianceEMC Directive 2004/108/EC
Low Voltage Directive 72/23/EEC
Resources & Downloads
Manuals
670 B High Accuracy Signal Conditioner Manual(627.4 kB, PDF)
Literature
Archive - 690 & 698 Pressure Sensor Data Sheet(218.8 kB, PDF)