The LDM-D12PA2CC1 Local Display Module features a 100 PSI full scale range with absolute calibration, and a 0-10 VDC output signal. It mounts to the 15-pin HD connector on the transducer, and provides a 15-pin HD connector for remote display. The LDM-D is a low-cost model that uses microprocessor controlled electronics to generate a brilliant red LED display that can be easily switched to show the transducer’s pressure in alternate engineering units such as bar, kPa, and Torr/mm Hg. The LDM-D operates on input voltages of +12 to +32 VDC, and it has a 0-10 VDC output. The LDM-D also can be mounted directly to compatible MKS 740B, 742B, 750B, 752B, 840B, 842B, 850B, 852B, 870B, 872B, AA07A and AA08A Baratron pressure transducers without requiring a separate power and signal cable to the host assuming that the transducer has a 15-pin high-density D-subminiature electrical connector.