Alter® MPS Industrial Switch Mode Microwave Power Supply Systems for 915 MHz Magnetrons
Model: alter-mps-microwave-power-supply
Alter® MPS Industrial Switch Mode Microwave Power Supply Systems for 915 MHz Magnetrons
Model: alter-mps-microwave-power-supply
Technical Specs
Type
MPS Series Switch-mode Microwave Power Supply System
Power Requirements
3 x 400 V 50/60 Hz
or 3 x 480 V 50/60 Hz
Alarm Management
Magnetron Overtemperature
Low Air Pressure from Head
Low Water Flow in Magnetron Head
Open Interlock
Supply of electromagnet incorrect
Filament resistance out of range
Alarm coming from SMxxxx inverter
Min and Max Ref/Fwd. Power
Weight
MPS24: 71 kg
MPS48: 126 kg
MPS72: 181 kg
MPS96: 236 kg
Cooling
MPS 24 air intake: approx 700 m3/h, water: 2L/min
MPS 48 air intake: approx 1500 m3/h, water: 4L/min
MPS 72 air intake: approx 2200 m3/h, water: 6L/min
MPS 96 air intake: approx 2800 m3/h, water: 8L/min
Ambient Operating Temperature
5°C to 40°C (41-104°F)
Controller Filament Output Stability
within 1% for input fluctuations
Controller Dimensions
19 inch Standard Rack, 3U Rack depth: 440 mm without handles
Communication
MBUS interface with Profibus or Modbus/TCP port
Controller Weight
16 kg
Transient Overvoltage
overvoltage cat. II according IEC 664
Power Unit Intake Current
@ 400 V: 40 A rms
@ 480 V: 34 A rms
Power Unit Dimensions
19 inch Standard Rack, 7U Rack depth: 440 mm without handles
Water flow rate for the Power Unit
2L/min (water not condensing 12°C - 35°C)
Use
Indoor use only
Relative Humidity
80% for temperature up to 31°C (88°F) decreasing linearly to 50% RH at 40°C (104°F)
Housing Cabinet Depth
800 mm (minimum)
Power Unit Weight
55 kg
Altitude
Tested up to 2,000 m (~6,000 ft)
Power Unit Voltage Limit
±10% minimum
Technical Specs
Type
MPS Series Switch-mode Microwave Power Supply System
Power Requirements
3 x 400 V 50/60 Hz
or 3 x 480 V 50/60 Hz
Alarm Management
Magnetron Overtemperature
Low Air Pressure from Head
Low Water Flow in Magnetron Head
Open Interlock
Supply of electromagnet incorrect
Filament resistance out of range
Alarm coming from SMxxxx inverter
Min and Max Ref/Fwd. Power
Weight
MPS24: 71 kg
MPS48: 126 kg
MPS72: 181 kg
MPS96: 236 kg
Cooling
MPS 24 air intake: approx 700 m3/h, water: 2L/min
MPS 48 air intake: approx 1500 m3/h, water: 4L/min
MPS 72 air intake: approx 2200 m3/h, water: 6L/min
MPS 96 air intake: approx 2800 m3/h, water: 8L/min
Ambient Operating Temperature
5°C to 40°C (41-104°F)
Controller Filament Output Stability
within 1% for input fluctuations
Controller Dimensions
19 inch Standard Rack, 3U Rack depth: 440 mm without handles
Communication
MBUS interface with Profibus or Modbus/TCP port
Controller Weight
16 kg
Transient Overvoltage
overvoltage cat. II according IEC 664
Power Unit Intake Current
@ 400 V: 40 A rms
@ 480 V: 34 A rms
Power Unit Dimensions
19 inch Standard Rack, 7U Rack depth: 440 mm without handles
Water flow rate for the Power Unit
2L/min (water not condensing 12°C - 35°C)
Use
Indoor use only
Relative Humidity
80% for temperature up to 31°C (88°F) decreasing linearly to 50% RH at 40°C (104°F)
Housing Cabinet Depth
800 mm (minimum)
Power Unit Weight
55 kg
Altitude
Tested up to 2,000 m (~6,000 ft)
Power Unit Voltage Limit
±10% minimum
