Digital Input/Output Modules
Model: digital-io-modules
Digital Input/Output Modules
Model: digital-io-modules
Technical Specs
Type
Digital Input/Output Module
Number of Inputs
12
Input Type
Sink or Source
Number of Outputs
12
Power Consumption
@ 200mA ≥ 24V_IO@ 2.5Amp, 24V_CORE@ 0.15Amp (per module) Assuming all DOs are loaded
Input Isolation
2.5 kVrms
DI refresh rate
10µs or 1ms
Debounce Filter
Fixed to 4 cycles of DI Refresh Rate (10.8 µsec)
Logic Level
24 VDC (8VDC - 30 VDC)
Maximum update rate
25 µSec
Output Type
Open collector sink/source
Protection
ESD to IEC 1000-4-2 ±4kV contact, DC + 5% (each channel)
Pull Up/Down Value
22K
Sink Input Logic Level
24VDC ±5%
Sink Input Nominal Load Impedance
6 kOhm
Sink Input Current, Maximum OFF
2.25mA (10.7 V)
Sink Input Current, Minimum ON
3.3mA (4.5 V)
Sink Input Current, Maximum ON
4.7mA
Sink Output Maximum thermal current limit (ON)
2A per bank of 6
Sink Output Maximum Available Current Sink (ON)
200mA
Sink Output Maximum Leakage Current (OFF)
0.1mA (output tied to 24v)
Sink Output Maximum Voltage Drop (ON)
Maximum 1.1v @ 200mA
Sink Output Minimum Thermal Current Limit (ON)
1A per bank of 6
Sink Output Maximum Inductive Load Energy, 1Hz Cycled
60mJ
Source Input Logic level
24v
Source Input High Voltage Range OFF
12.8V (2.15 mA)
Source Input Low Voltage Range ON
15V (2.5 mA)
Source Input Input Current, Maximum ON
4.7mA
Source Input Nominal Load Impedance
6 kOhm
Source Output Maximum Available Current Source (ON)
200mA
Source Output Maximum Thermal Current Limit (ON)
2A per bank of 6
Source Output Maximum Leakage Current (OFF)
0.1mA (output tied to ground)
Source Output Minimum Thermal Current Limit (ON)
1A per bank of 6
Source Output Output High Voltage
Minimum 23.7V @ 200mA
Source Output Maximum Inductive Load Energy, 1Hz Cycled
60mJ
Operating Temperature
0 to 55°C, with 2°C upper limit reduction per 1000 ft above sea level
Storage Temperature
-40°C to 85°C
Altitude
0-10,000 ft above sea level
Humidity
5-85% non-condensing
Dimensions
35 x 125 x 92.3 mm (1.4 x 3.3 x 4.9 inches) (W x H x D)
Mounting
DIN rail
Technical Specs
Type
Digital Input/Output Module
Number of Inputs
12
Input Type
Sink or Source
Number of Outputs
12
Power Consumption
@ 200mA ≥ 24V_IO@ 2.5Amp, 24V_CORE@ 0.15Amp (per module) Assuming all DOs are loaded
Input Isolation
2.5 kVrms
DI refresh rate
10µs or 1ms
Debounce Filter
Fixed to 4 cycles of DI Refresh Rate (10.8 µsec)
Logic Level
24 VDC (8VDC - 30 VDC)
Maximum update rate
25 µSec
Output Type
Open collector sink/source
Protection
ESD to IEC 1000-4-2 ±4kV contact, DC + 5% (each channel)
Pull Up/Down Value
22K
Sink Input Logic Level
24VDC ±5%
Sink Input Nominal Load Impedance
6 kOhm
Sink Input Current, Maximum OFF
2.25mA (10.7 V)
Sink Input Current, Minimum ON
3.3mA (4.5 V)
Sink Input Current, Maximum ON
4.7mA
Sink Output Maximum thermal current limit (ON)
2A per bank of 6
Sink Output Maximum Available Current Sink (ON)
200mA
Sink Output Maximum Leakage Current (OFF)
0.1mA (output tied to 24v)
Sink Output Maximum Voltage Drop (ON)
Maximum 1.1v @ 200mA
Sink Output Minimum Thermal Current Limit (ON)
1A per bank of 6
Sink Output Maximum Inductive Load Energy, 1Hz Cycled
60mJ
Source Input Logic level
24v
Source Input High Voltage Range OFF
12.8V (2.15 mA)
Source Input Low Voltage Range ON
15V (2.5 mA)
Source Input Input Current, Maximum ON
4.7mA
Source Input Nominal Load Impedance
6 kOhm
Source Output Maximum Available Current Source (ON)
200mA
Source Output Maximum Thermal Current Limit (ON)
2A per bank of 6
Source Output Maximum Leakage Current (OFF)
0.1mA (output tied to ground)
Source Output Minimum Thermal Current Limit (ON)
1A per bank of 6
Source Output Output High Voltage
Minimum 23.7V @ 200mA
Source Output Maximum Inductive Load Energy, 1Hz Cycled
60mJ
Operating Temperature
0 to 55°C, with 2°C upper limit reduction per 1000 ft above sea level
Storage Temperature
-40°C to 85°C
Altitude
0-10,000 ft above sea level
Humidity
5-85% non-condensing
Dimensions
35 x 125 x 92.3 mm (1.4 x 3.3 x 4.9 inches) (W x H x D)
Mounting
DIN rail
