HPQ3 High Pressure 0.001 Torr Residual Gas Analyzers
Model: hpq3-high-pressure-residual-gas-analyzer
HPQ3 High Pressure 0.001 Torr Residual Gas Analyzers
Model: hpq3-high-pressure-residual-gas-analyzer
Technical Specs
Mass Range
1-100 amu
Filaments
Twin Tungsten or Thoria Coated Iridium
Detector
Faraday
Maximum Analyzer Operating Pressure
0.001 Torr (0.0013 mbar)
Minimum Detectable Partial Pressure
8e-11 Torr (1e-10 mbar)
Minimum Detectable Concentration
5ppm at 0.001 Torr (0.0013 mbar)
Software
Built-in web applications allowing RGA control and data acquisition using a platform independent web browser without the need for dedicated installed software Process Eye Professional and TOOLweb RGA Windows software packages for Windows xP, Vista or Win7 (32 and 64bit.)
Mass Stability
±0.1 amu over 8 hours at stable ambient
Resolution
Better than 10% valley for peaks of equal height across mass range
Mounting Flange
DN38CF (70mm/2.75inch OD) Conflat
Bake Out Temperature
250°C with electronics removed
Operating Temperature
Electronics: 10-40°C
Power Requirements
24V DC, 3A external universal voltage supply (included)
Maximum Operating Conditions
80% RH (non condensing)
Data Acquisition Method
Dedicated real time acquisition processor
Data Acquisition Speed
< 3ms per point for analog or barchart scanning
Data Collection Methods
Analog scanning, partial or full mass range 8, 16 or 32 points/amu Barchart scanning, partial or full mass range Peak-jump collection of any combination of peaks at up to 15 per acquisition set
Communication
10/100 Base-T Ethernet, static or automatically assigned IP addresses
Settling Time
< 20ms to 1 ppm of Maximum Signal
Control Method
CE operating system processor with web-server interface
Command Structure
Documented SDK and ASCII command protocols
Filament Protection
Dedicated x-Trip with optional pressure sensor for use with cryo-pump isolation valve.
Compliance
CE (control unit)
Technical Specs
Mass Range
1-100 amu
Filaments
Twin Tungsten or Thoria Coated Iridium
Detector
Faraday
Maximum Analyzer Operating Pressure
0.001 Torr (0.0013 mbar)
Minimum Detectable Partial Pressure
8e-11 Torr (1e-10 mbar)
Minimum Detectable Concentration
5ppm at 0.001 Torr (0.0013 mbar)
Software
Built-in web applications allowing RGA control and data acquisition using a platform independent web browser without the need for dedicated installed software Process Eye Professional and TOOLweb RGA Windows software packages for Windows xP, Vista or Win7 (32 and 64bit.)
Mass Stability
±0.1 amu over 8 hours at stable ambient
Resolution
Better than 10% valley for peaks of equal height across mass range
Mounting Flange
DN38CF (70mm/2.75inch OD) Conflat
Bake Out Temperature
250°C with electronics removed
Operating Temperature
Electronics: 10-40°C
Power Requirements
24V DC, 3A external universal voltage supply (included)
Maximum Operating Conditions
80% RH (non condensing)
Data Acquisition Method
Dedicated real time acquisition processor
Data Acquisition Speed
< 3ms per point for analog or barchart scanning
Data Collection Methods
Analog scanning, partial or full mass range 8, 16 or 32 points/amu Barchart scanning, partial or full mass range Peak-jump collection of any combination of peaks at up to 15 per acquisition set
Communication
10/100 Base-T Ethernet, static or automatically assigned IP addresses
Settling Time
< 20ms to 1 ppm of Maximum Signal
Control Method
CE operating system processor with web-server interface
Command Structure
Documented SDK and ASCII command protocols
Filament Protection
Dedicated x-Trip with optional pressure sensor for use with cryo-pump isolation valve.
Compliance
CE (control unit)
Resources & Downloads
Literature
Drawings & CADs
