PDR2000A Two-Channel Digital Power Supply and Readout

Model: pdr2000a-2-channel-digital-power-supply-and-display

Compare

Display
Digital, 4-place Red LED
Display Units
Torr/mTorr, or mbar/microbar
Number of Channels
2
Power Requirements
110-240 VAC; 47-63 Hz, 40 VA
Input Signal
0 to 10 VDC
Output Power
±15 VDC @ 750 mA
Output Signal
Analog:
0-5VDC output each channel (0.5VDC per decade (based on displayed value)
0-10VDC each channel (duplicate of the input)
Digital:
RS232 (9600 baud, 8 data bits, no parity, 1 stop bit)
Communication Protocol
RS-232 (9600 baud, 8 data bits, no parity, 1 stop bit)
Trip Points
2 fully programmable trip points
Trip Point Relay Ratings
2 Amps @ 30 VDC

For Use With
MKS Instruments type 628 (one only), 622, 623, 624, 627, 722, 750, 850, 852, 870, 872, 223 (unidirectional only) capacitance manometers
Controls
Gauge Select, Full Scale Adjust, Calibrate, Zero, Set Point 1 High, Set Point 1 Low, Set Point 2 High, Set Point 2 Low, Torr/mbar Select
Operating Temperature
2° - 50°C
Weight
1 lb
Dimensions
94 mm x 47 mm x 165 mm
Mounting
1/8 inch DIN enclosure
Compliance
EMC Directive 2014/30/EC
RoHS Directive 2011/65/U

Display
Digital, 4-place Red LED
Display Units
Torr/mTorr, or mbar/microbar
Number of Channels
2
Power Requirements
110-240 VAC; 47-63 Hz, 40 VA
Input Signal
0 to 10 VDC
Output Power
±15 VDC @ 750 mA
Output Signal
Analog:
0-5VDC output each channel (0.5VDC per decade (based on displayed value)
0-10VDC each channel (duplicate of the input)
Digital:
RS232 (9600 baud, 8 data bits, no parity, 1 stop bit)
Communication Protocol
RS-232 (9600 baud, 8 data bits, no parity, 1 stop bit)
Trip Points
2 fully programmable trip points
Trip Point Relay Ratings
2 Amps @ 30 VDC

For Use With
MKS Instruments type 628 (one only), 622, 623, 624, 627, 722, 750, 850, 852, 870, 872, 223 (unidirectional only) capacitance manometers
Controls
Gauge Select, Full Scale Adjust, Calibrate, Zero, Set Point 1 High, Set Point 1 Low, Set Point 2 High, Set Point 2 Low, Torr/mbar Select
Operating Temperature
2° - 50°C
Weight
1 lb
Dimensions
94 mm x 47 mm x 165 mm
Mounting
1/8 inch DIN enclosure
Compliance
EMC Directive 2014/30/EC
RoHS Directive 2011/65/U

Contact an Applications Specialist by sending us an email