Sorry, this product is no longer offered for sale.

PVS6F Portable Vacuum Calibration System

Model: pvs6f-calibration-system

Type
Portable Vacuum Calibration System
Transfer Standard
AA06A absolute sensors (NIST traceable)
Accuracy
0.08% of Reading (± temp. coefficients)
Optional 0.05% of Reading (± temp. coefficients) for 1, 10, 100, or 1000 mmHg Full Scale
Resolution
1 x 10^-6
Fitting Type
Test Gas Inlet: 0.25 in. Swagelok® bulkhead
Test Port (3): Swagelok 8 VCR® male (3)
Operating Temperature
15-40°C
Readout
MKS 670, 5½-digit LCD (one per standard)
Unit under test readout electronics: PDR2000
Power Requirements
110 VAC, 60 Hz; 220 VAC, 50 Hz; 15 Amps
Warm-up Time
4 hours. However, use of the internal 500 VA UPS will keep the Transfer Standards warmed up and ready for immediate use for at least 60 minutes.

Weight
Approximately 250 lbs (110 kg)
Pressure Control
Manual needle valve to control gas inlet; manual isolation valve and metering bypass valve for pressure throttle control
Compliance
CE
High Vacuum Gauge
IMAG ionization gauge and controller provides 1 x 10^-3 to 1 x 10^-9 mmHg measurement
Standby Power
500 V.A. uninterruptible power supply keeps three Transfer Standards warmed up and ready to use for up to 60 min.
Test/Calibration
5-10 psig dry filtered N2
Vacuum Pumping System
Mechanical Pump: Oil free 4 stage diaphragm pump operated as dual two stage diaphragm pumps
High Vacuum Pump: Hybrid turbo/drag air-cooled
Normal Base Pressure: <5 x 10^-7 mmHg

Type
Portable Vacuum Calibration System
Transfer Standard
AA06A absolute sensors (NIST traceable)
Accuracy
0.08% of Reading (± temp. coefficients)
Optional 0.05% of Reading (± temp. coefficients) for 1, 10, 100, or 1000 mmHg Full Scale
Resolution
1 x 10^-6
Fitting Type
Test Gas Inlet: 0.25 in. Swagelok® bulkhead
Test Port (3): Swagelok 8 VCR® male (3)
Operating Temperature
15-40°C
Readout
MKS 670, 5½-digit LCD (one per standard)
Unit under test readout electronics: PDR2000
Power Requirements
110 VAC, 60 Hz; 220 VAC, 50 Hz; 15 Amps
Warm-up Time
4 hours. However, use of the internal 500 VA UPS will keep the Transfer Standards warmed up and ready for immediate use for at least 60 minutes.

Weight
Approximately 250 lbs (110 kg)
Pressure Control
Manual needle valve to control gas inlet; manual isolation valve and metering bypass valve for pressure throttle control
Compliance
CE
High Vacuum Gauge
IMAG ionization gauge and controller provides 1 x 10^-3 to 1 x 10^-9 mmHg measurement
Standby Power
500 V.A. uninterruptible power supply keeps three Transfer Standards warmed up and ready to use for up to 60 min.
Test/Calibration
5-10 psig dry filtered N2
Vacuum Pumping System
Mechanical Pump: Oil free 4 stage diaphragm pump operated as dual two stage diaphragm pumps
High Vacuum Pump: Hybrid turbo/drag air-cooled
Normal Base Pressure: <5 x 10^-7 mmHg