AX8575 Stand-Alone High Flow, High Concentration Ozone Delivery System
Model: AX8575-multi-channel-ozone-delivery-system
AX8575 Stand-Alone High Flow, High Concentration Ozone Delivery System
Model: AX8575-multi-channel-ozone-delivery-system
Technical Specs
Type
Ozone Gas Delivery System
Ozone Output
350g/Nm3
Flow Rate
40 slm
Feed Gas
Oxygen, Nitrogen (20 - 100 ppm of total flow)
Feed Gas Supply Pressure
50 psig (3.5 kg/cm2) nominal, 60 psig (4.2 kg/cm2) maximum, N2 pressure 10 psi higher than O2 pressure
Feed Gas Purity
99.9995% minimum
Operating Temperature
41 - 104°F (5 - 40°C)
Cooling Water Temperature Required
12 - 21°C with chiller, 5 - 17°C without chiller
Cooling Water Filtration Required
100 micron Filtration PWC (with chiller)
Cooling Water Quality Required
1 - 3 MOhm DI, Note: Max DI water/Glycol blend: 70/30
Cooling Water Minimum Flow Required
10 gpm nominal (water modulating valve range: 2 - 10 gpm) with chiller, 2.5 gpm per Generator (configuration dependant) without chiller
Cooling Water Connections Required
1 in. compression (Swagelok®)
Cooling Water Heat Load Required
10 kw (based on two generator configuration) with chiller, 5 kw per generator without chiller
Voltage Requirements
208 volts AC (±10%), three phase
Current Requirements
31 Amps RMS, 50 Amps service (depending on configuration) minimum of 10,000 A.I.C, 60 Amps service with chiller
Frequency
50/60 Hz
Exhaust Flow Rate
150 cfm (70.8 l/s)
Exhaust Type
SEMI Category 4 (accidental or emergency release of hazardous gas or vapor)
Exhaust Static Pressure
0.10 in. (2.54 mm) H2O minimum, measured at the bottom of the duct flange adapter on cabinet
Control Air Pressure
70 - 100 psig
Control Air Type
CDA or dry nitrogen, 40µm filtered
Control Air Fitting
1/4 in. compression (Swagelok®)
Exhaust Connection
6 in. diameter duct opening or 4 in. diameter duct opening
Dimensions
24 x 75 x 36 in. (610 mm x 1575 mm x 914 mm) (width x height x depth)
Relative Humidity
30 - 90% (non - condensing)
Weight
600 lbs.(272 kg) for system with one generator, 880 lbs.(400 kg) for system with four generators, 1100 lbs. (499 kg) for system with two generators and internal chiller
Compliance
CE, S2 - 0302, F47
Altitude
Up to 3280 feet (1000 m) above mean sea level
Technical Specs
Type
Ozone Gas Delivery System
Ozone Output
350g/Nm3
Flow Rate
40 slm
Feed Gas
Oxygen, Nitrogen (20 - 100 ppm of total flow)
Feed Gas Supply Pressure
50 psig (3.5 kg/cm2) nominal, 60 psig (4.2 kg/cm2) maximum, N2 pressure 10 psi higher than O2 pressure
Feed Gas Purity
99.9995% minimum
Operating Temperature
41 - 104°F (5 - 40°C)
Cooling Water Temperature Required
12 - 21°C with chiller, 5 - 17°C without chiller
Cooling Water Filtration Required
100 micron Filtration PWC (with chiller)
Cooling Water Quality Required
1 - 3 MOhm DI, Note: Max DI water/Glycol blend: 70/30
Cooling Water Minimum Flow Required
10 gpm nominal (water modulating valve range: 2 - 10 gpm) with chiller, 2.5 gpm per Generator (configuration dependant) without chiller
Cooling Water Connections Required
1 in. compression (Swagelok®)
Cooling Water Heat Load Required
10 kw (based on two generator configuration) with chiller, 5 kw per generator without chiller
Voltage Requirements
208 volts AC (±10%), three phase
Current Requirements
31 Amps RMS, 50 Amps service (depending on configuration) minimum of 10,000 A.I.C, 60 Amps service with chiller
Frequency
50/60 Hz
Exhaust Flow Rate
150 cfm (70.8 l/s)
Exhaust Type
SEMI Category 4 (accidental or emergency release of hazardous gas or vapor)
Exhaust Static Pressure
0.10 in. (2.54 mm) H2O minimum, measured at the bottom of the duct flange adapter on cabinet
Control Air Pressure
70 - 100 psig
Control Air Type
CDA or dry nitrogen, 40µm filtered
Control Air Fitting
1/4 in. compression (Swagelok®)
Exhaust Connection
6 in. diameter duct opening or 4 in. diameter duct opening
Dimensions
24 x 75 x 36 in. (610 mm x 1575 mm x 914 mm) (width x height x depth)
Relative Humidity
30 - 90% (non - condensing)
Weight
600 lbs.(272 kg) for system with one generator, 880 lbs.(400 kg) for system with four generators, 1100 lbs. (499 kg) for system with two generators and internal chiller
Compliance
CE, S2 - 0302, F47
Altitude
Up to 3280 feet (1000 m) above mean sea level
Resources & Downloads
Literature
Drawings & CADs
